Control Panel
Specifying menu items
Menu items can be set as follows.
1. Press ▲ or ▼ to select the desired setting, and then press the OK button.
After two seconds, the display reverts to the upper level menu.
Note
• If a conrmation message is displayed regarding the setting you entered, press the OK button. The
setting is applied, and the printer is now in Standby .
Specifying numerical values
Follow these steps to enter numbers. In this example, network settings items are entered.
1. Press the ◄ or ► button to move to the next eld for input.
2. Press the ▲ or ▼ button to enter the value.
Note
• Hold down ▲ or ▼ to increase or decrease the value continuously .
3. Repeat steps 1 and 2 to complete the settings, and then press the OK button.
Note
• If a conrmation message is displayed regarding the setting you entered, press the OK button. The
setting is applied, and the printer is now in Standby .
Executing menu commands
Menu commands can be executed as follows.
1. Press ▲ or ▼ to select the action to execute, and then press the OK button.
The menu command is now executed.
34 Printer Parts