Messages regarding HP-GL/2
Messages regarding HP-GL/2
This type of paper is not compatible with HP-GL/2.
Cause Corrective Action
Follow these steps to replace the type of paper in
the printer .
1. Press ▲ or ▼ to select Stop Printing , and then
press the OK button.
2. Replace the paper with a type compatible with
HP-GL/2. For details on paper compatible with
HP-GL/2, refer to the Paper Reference Guide .
( → P .95)
The printer has received a HP-GL/2 print job that
cannot be printed on the paper that has been
advanced.
Press ▲ or ▼ to select Print , and then press the OK
button to resume printing. However , note that this
error may cause paper jams and af fect the printing
quality .
GL2: Wxxxx The memory is full. (xxxx is 0501, 0903, or
0904)
Cause Corrective Action
The printer memory is full. Because the entire print job could not be received,
the printer may not be able to print the entire original.
Check the printing results.
GL2: W0502 The parameter is out of range.
Cause Corrective Action
Check the print job.A parameter specied in a HP-GL/2 command is out
of the supported range.
If you have specied ProcessingOption > W arning
> On in the Control Panel menu, set it to Off instead.
GL2: W0504 This command is not supported.
Cause Corrective Action
Check the print job.The printer has received an unsupported HP-GL/2
command.
If you have specied ProcessingOption > W arning
> On in the Control Panel menu, set it to Off instead.
710 Error Message
To Next Page
Loading...
Need help?
General
Weight and Dimensions
