Messages regarding ink
Messages regarding ink
Ink insufcient.
Cause Corrective Action
Press ▲ or ▼ to select Rep. Ink T ank , and then
press the OK button. Replace the Ink T ank that is
low with a new Ink T ank .
( → P .623)
The ink level is low , so you cannot print, clean the
Printhead , or do other operations that require ink.
Press ▲ or ▼ to select Continue to print , and then
press the OK button to resume printing. However ,
note that this error may af fect the printing quality .
No ink left.
Cause Corrective Action
There is no ink left. Open the Ink T ank Cover and replace the Ink T ank
for which the Ink Lamp is ashing.
( → P .623)
Remaining level of the ink cannot be correctly detected.
Cause Corrective Action
Ink level detection cannot work correctly if you use
rell ink tanks.
The rell ink tank can no longer be used. See the
section “Ink level detection” and take the appropriate
action. ( → P .687)
Unable to detect ink level correctly .
Cause Corrective Action
The remaining ink level could not be correctly
detected.
Close the Ink T ank Cover .
The buzzer will stop once the error is cleared.
Close Ink T ank Cover
Cause Corrective Action
The Ink T ank Cover is open. Close the Ink T ank Cover .
The buzzer will stop once the error is cleared.
Error Message 703