Messages regarding paper
Paper position not suitable for borderless printing.
Cause Corrective Action
Press ▲ or ▼ to select Stop Printing , and then
press the OK button.
Use each type of paper only where the recommended
environmental conditions are met. For details on
environmental conditions for various paper , see the
Paper Reference Guide .
( → P .95)
Because paper expands or contracts depending on
the environment of use, it may become narrower or
wider than the supported width for borderless printing.
Select None when you have set Detect Mismatch in
the Control Panel menu to W arning .
However , note that this error may af fect the printing
quality .
Press ▲ or ▼ to select Fix Paper Position and
straighten the paper so that the edges are between
the ink grooves for borderless printing.
Insert the roll rmly until it touches the ange of the
Roll Holder .
( → P .103)
Select None when you have set Detect Mismatch in
the Control Panel menu to W arning .
However , note that this error may af fect the printing
quality .
The paper is loaded askew .
Press ▲ or ▼ to select Print W ith Border , and
then press the OK button to continue printing. The
document will be printed with a border .
Roll paper is not securely in contact with roll holder .
Cause Corrective Action
When the roll was loaded, the roll was not inserted
rmly all the way on the Roll Holder .
Follow these steps to reload the roll.
1. Press the OK button and remove the roll holder
from the printer .
2. Insert the roll rmly on the Roll Holder until it
touches the ange.
( → P .103)
3. Load the Roll Holder in the printer .
702 Error Message
To Next Page
Loading...
Need help?
General
Weight and Dimensions
