Messages regarding paper
The paper is too small.
Cause Corrective Action
Press ▲ or ▼ to select Print , and then press the OK
button to resume printing.
However , note that this error may cause paper jams
and af fect the printing quality .
Adjust the paper size setting in the printer driver to
match the size loaded in the printer as follows.
1. Press ▲ or ▼ to select Stop Printing , and then
press the OK button.
2. Change the paper size setting in the printer driver
to the size loaded in the printer and try printing
again.
When Detect Mismatch in the Control Panel menu
is set to Pause , paper smaller than the size specied
in the printer driver is loaded.
Replace the loaded paper with paper of a size that
matches the size setting in the printer driver as
follows.
1. Press ▲ or ▼ to select Change Paper , and then
press the OK button to stop printing.
2. Replace the loaded paper to match the paper
width setting in the printer driver and try printing
again.
When Detect Mismatch in the Control Panel menu is
set to W arning , paper smaller than the size specied
in the printer driver is loaded.
Y ou can continue to print, but note that this error may
cause problems in the printing results.
690 Error Message
To Next Page
Loading...
Need help?
General
Weight and Dimensions
