Handling rolls
Specifying the Cutting Method for Rolls
How rolls are cut after ejection varies depending on printer settings.
Cutting Method Printer Setting Driver Setting
Automatic The roll is automatically cut by the Cutter
Unit following printer driver settings.
Automatic Y es
Eject
(→P .130)
Choose this setting if you prefer not to
have documents dropped immediately after
printing, as when waiting for ink to dry .
T o cut the roll with the Cutter Unit , press the
Cut button.
Eject Y es
Manual
(→P .131)
Choose this setting when using media that
cannot be cut using the Cutter Unit .
Cut each page from the roll using scissors.
For continuous printing (if you will cut each
page later), select Auto Cut > Y es or select
Print Cut Guideline .
( → P .331)
Media
Menu >
Paper
Details >
(V arious
T ypes of
Paper) >
Cutting
Mode
Manual No Y es Print
Cut
Guideline
Paper
Cutting
(→P .132)
Choose this option if you want to cut pages
by pressing Cutter Unit buttons for manual
cutting after printing when Auto Cut > No is
selected or Print Cut Guideline is selected
in the printer driver .
Otherwise choose this option if you want to
cut the roll edge after loading a roll.
Cut button
pressed
Y es
Auto Cut
No Print
Cut
Guideline
Note
• Automatic and Eject are valid only when you have selected Auto Cut > Y es in the printer driver .
• With Eject, printing does not resume after a series of jobs have been printed continuously until the
roll is cut.
• Eject is the preset selection in Cutting Mode for some types of paper . For this paper , we recommend
keeping the preset cutting mode.
Cut rolls manually in the following cases:
Handling Paper 129
To Next Page
Loading...
Need help?
General
Weight and Dimensions
