Printing banners or at other non-standard sizes
Printing banners or at other non-standard
sizes
Printing V ertical or Horizontal Banners (Large-Format
Printing)
Y ou can create vertical or horizontal banners by printing originals that are in banner format on rolls.
Originals created in Microsoft W ord or other applications in your preferred size can be enlarged to ll the width
of roll paper by completing simple printer driver settings.
Fit Roll Paper W idth
Y ou can easily create vertical or horizontal banners by automatically enlarging or reducing originals to t the
full width of rolls.
Note
• The maximum supported roll length is 18.0 m or 19.7 yd.
For instructions on printing vertical or horizontal banners, refer to the following topics, as appropriate for
your computer and operating system.
• Printing V ertical or Horizontal Banners (Large-Format Printing; Windows) (→P .254)
• Printing V ertical or Horizontal Banners (Large-Format Printing; Mac OS X) (→P .258)
Important
• Before printing, check how much of the roll paper is left. If you have activated automatic detection of the
remaining roll paper , a warning message is displayed when there is not enough roll paper left.
• If not much ink is left, prepare replacement ink tanks.
• T o print at a higher level of quality , in the printer driver , choose High or Highest in Print Quality , and
choose Unidirectional Printing as the direction of printing.
Enhanced Printing Options 253
To Next Page
Loading...
Need help?
General
Weight and Dimensions
