Adjusting the feed amount
7. Press ▲ or ▼ to select Manual , and then press the OK button.
T est pattern A is printed for manual adjustment.
Note
• When printing on sheets, follow the instructions on the Display Screen and remove the sheet.
8. Examine test pattern A for adjustment. Determine the pattern in which banding is least noticeable.
Note
• If banding seems least noticeable in two patterns but you cannot decide which one is better , choose
an intermediate value.
For example, choose 1 1 if you cannot decide whether pattern 10 or 12 is better .
9. Press ▲ or ▼ to select the pattern number you have decided, and then press the OK button.
T est pattern B is printed for adjustment.
Note
• If you printed test pattern A on a sheet, follow the instructions on the Display Screen and use another
sheet of the same type of paper .
Additionally , after test pattern B is printed, follow the instructions on the Display Screen and remove
the sheet.
10. Examine test pattern B for adjustment. Determine the pattern in which banding is least noticeable.
1 1. Press ▲ or ▼ to select the pattern number you have decided, and then press the OK button.
The adjustment value is now registered, and adjustment is complete.
Adjustments for Better Print Quality 617