Control Panel
Setting Item Description, Instructions
Dene Palette Specify the W idth , Color , and Line Attributes in
the palette Pen no. . Choose Factory to conrm the
values when Factory is selected in Select Palette .
In Line Attributes , choose No Setting or Circle
Setting as the processing for the ends and junctions
of lines.
• If you choose No Setting
• If you choose Circle Setting
Pen
Setup
Reset Palette Restore Dene Palette to the default palette settings.
Smoothing Choose whether to print arcs as smooth curved lines
or as multiple connected line segments.
• If you choose Software
Operation is determined by the application. If
nothing is specied by the application, the result is
as shown in the gure.
Note: By default, this is a 72-sided gure
• If you choose Smooth
ThickenFineLines Select On to print ne lines more distinctly .
Line
& Pen
Manager
AdjustFaintLines If ne lines are printed in colors that do not match
the colors of other shapes, selecting Off may help
produce the expected results. However , lines in some
colors may appear broken.
W arning Select On to have any GL2-related warnings
displayed.
GL2
Settings
Process-
ing
Option
PageSizeProcess1 Normally , the area available for printing excludes
a margin required by the printer , and images are
positioned accordingly . Selecting On in this setting
eliminates any misalignment of the printing position if
the image itself includes a border .
Printer Parts 55
To Next Page
Loading...
Need help?
General
Weight and Dimensions
