Control Panel
Setting Item Description, Instructions
Keep Paper Size Choose Off to give priority to margin settings. The
larger value is used if the margin specied in the
printer driver does not match the margin in the printer
menu
T rimEdge Reload Specify whether to trim the leading edge of the
currently retracted roll when the roll is advanced. Cut
the edge if you are concerned about any marks left
on the roll when the roll is left in the retracted position.
Specify On to have rolls cut when printing begins after
Sleep mode or when the power is restored. Selecting
Automatic will trim the edge when the roll has been
in the retracted position for two days or more.
Rep.P .head Print Choose On to have the printer automatically execute
the Advanced Adj. operations after you replace the
Printhead .
( → P .604)
Nozzle Check In Frequency , specify the timing for automatic
checks of nozzle clogging. Choose Standard to have
the printer adjust the timing for checks based on the
frequency of nozzle use. Choose 1 page to check
once per page.
Select W arning > On to display warnings if the
nozzles clog during printing.
Use RemoteUI Choosing Off prohibits access from RemoteUI.
Settings can only be congured from the control
panel.
System
Setup
Reset PaprSetngs Restores settings that you have changed with Media
Conguration T ool to the default values.
Prep.MovePrinter Select this option when transferring the printer to
another location. Follow the instructions displayed to
complete the required procedure.
( → P .651)
Not displayed during a warning message that the
remaining Maintenance Cartridge capacity is low .
Admin.
Menu
Change Password By setting a password, you can restrict menu display
and conguration as follows. Y ou can input between
0 and 9999999.
• V iewing and conguration by administrators only
IPv4 Settings
Change Password
Init.Admin.Pswd
58 Printer Parts
To Next Page
Loading...
Need help?
General
Weight and Dimensions
