4- 31
îš‹ Replacing the Cutter Blade
TOP
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Index
Contents
Chapter 2
Using Various Media
Chapter 1
Basic Use
6 Open the top cover.
Important
z Do not touch any areas other than as directed. Your
hands could get dirty or this could damage the printer.
z If the cutter unit is dirty, wring out a damp, clean cloth
and use it to clean the cutter unit before replacing the
cutter blade.
7 Rotate the cutter blade knob (a) to the left,
and remove the cutter blade from the cutter
unit.
Important
z After removing the cutter blade, never touch the
cutting edge (b). This could cause personal injury.
8 Insert the new cutter blade such that the []
symbol on the new cutter blade is aligned
with the z symbol on the cutter unit, and
rotate it to the right to lock.
Note
z Dispose of the used cutter blade according to local
laws.
a
b
To Next Page
Loading...
Need help?
General