4- 32
Replacing the Cutter Blade
TOP
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Index
Contents
Chapter 2
Using Various Media
Chapter 1
Basic Use
9 Close the top cover.
Please Wait.. appears in the bottom line of the
display. After the carriage has moved, the Reset Cut
Count message is displayed.
10Press the OK button.
The printer returns to online mode.
Note
z Refer to the “Round Blade Cutter Unit Setup Guide”
binding to the Round Blade Cutter Unit for the
installation.
z Refer to the “Media Type” (→ P. 2 - 4) for the available
paper type with the Round Blade Cutter Unit.
Reset Cut Count
Press OK/Stop
To Next Page
Loading...
Need help?
General