6- 6
îš‹ Message Is Displayed
TOP
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Index
Contents
Chapter 2
Using Various Media
Chapter 1
Basic Use
Load Cut Sheet
Cause 1: The printer is waiting for the roll media to be
loaded.
Solution 1: Load cut sheets of the type and size specified
to the printer using the next step. (→ P.2-38)
1. Load cut sheets of the specified size and
type.
2. Select the media type.
3. Press the OK button.
Solution 2: Press and hold the Stop/Eject button for at
least 1 second to stop printing.
Remove Cut Sheet
Cause 1: The printer is waiting for you to remove the
ejected sheets.
Solution 1: Perform the procedure described below to
remove the sheets. (→ P.2-42)
1. Open the top cover.
2. Lift the release lever, and remove the cut
sheets.
3. Lower the release lever.
4. Close the top cover.
To Next Page
Loading...
Need help?
General