Canon LBP710Cx - Setting Ipv4 Address

Setting IPv4 Address
0YSF-035
The machine's IPv4 address can be either assigned automatically by a dynamic IP
addressing protocol, such as DHCP, or entered manually. When connecting the
machine to a wired LAN, make sure that the connectors of the LAN cable are rmly
inserted into the ports ( Connecting to a Wired LAN(P. 188) ).
Setting IPv4 Address
1
Press ( ).
2
Use / to select <Network>, and press .
● When a message appears, press .
3
Select <TCP/IP Settings> <IPv4 Settings> <IP Mode>.
4
Congure IP address settings.
<Auto>
Select to automatically assign an IP address via a protocol such as DHCP.
<Manual>
Select to congure the IP address settings by manually entering an IP address.
Automatically assigning an IP address
1
Select <Auto>, and press .
2
Select <Protocol>, and press .
3
Select <Use DHCP>, <Use BOOTP>, or <Use RARP>, and press .
Network
191