Paper Curls
Are you using paper that has absorbed moisture?
● Replace with appropriate paper.
Loading Paper(P. 38)
● When the current setting of the paper type is <Plain>, change it to <Plain L>.
Specifying Paper Size and Type(P. 57)
● For the relevant paper source, set <Curl Correction> to <On>.
Curl Correction(P. 426)
● If you select <On>, the print speed may be slower. Also, printouts may be faded.
Are you using appropriate paper?
● Check usable paper, and replace with appropriate paper. Also, specify the paper size and type settings
properly.
Paper(P. 620)
Loading Paper(P. 38)
Specifying Paper Size and Type(P. 57)
● Turn over the paper (front to back) so that the print side is changed, and then reload the paper.
● Rarely, the symptoms may worsen depending on the type of paper you are using. In that case, get the
print side back to original.
Troubleshooting
557
To Next Page
Loading...
