Canon LBP710Cx - Ip Address Settings

Auto
Manual
Protocol
*
Select the protocol to use when <IP Mode> is set to <Auto>. If you set the selected protocol to <On>, the
other two protocols are automatically set to <Off>.
Setting IPv4 Address(P. 191)
Use DHCP
Off
On
Use BOOTP
Off
On
Use RARP
Off
On
Auto IP
*
Select whether to automatically obtain an IP address. Specify <On> when <IP Mode> is set to <Auto>.
Setting IPv4 Address(P. 191)
Off
On
IP Address Settings
Congure the IP address, which is used for identifying devices, such as computers and printers, on a TCP/IP
network. Setting IPv4 Address(P. 191)
IP Address
0.0.0.0
to 255.255.255.255
Subnet Mask
0.0.0.0
to 255.255.255.255
Gateway Address
0.0.0.0
to 255.255.255.255
DNS
Specify settings for the server address of the Domain Name System (DNS), which provides a host name for IP
address resolutions. Use / to move the cursor, and use the numeric keys to specify the address. Use
the Remote UI to specify other settings for DNS. Conguring DNS(P. 223)
Primary Address
0.0.0.0
to 255.255.255.255
Secondary Address
0.0.0.0
to 255.255.255.255
Setting Menu List
379