Canon LBP710Cx - Maintenance

Maintenance
0YSF-06U
This chapter describes upkeep of the machine, including how to clean the machine and initialize settings.
◼ Basic Cleaning
Cleaning the Machine(P. 563)
● The machine becomes dirty, see Exterior(P. 564) .
● Black spots appear on printouts, see Fixing Unit(P. 565) .
◼ Replacing Toner Cartridges
● If you want to check the remaining toner level, see Replacing Toner
Cartridges(P. 566) .
● How to replace toner cartridges, see
How to Replace Toner
Cartridges(P. 569) .
◼
Replacing the Waste Toner Container
● The replacement message has been displayed, see Replacing the Waste Toner Container(P. 571) .
● How to replace the waste toner container, see How to Replace the Waste Toner Container(P. 572) .
◼
Relocating the Machine
● Relocating the machine for maintenance or an oce move, see Relocating
the Machine(P. 574) .
◼ Managing Print Quality Maintaining and Improving Print Quality(P. 576)
● If you want to adjust the toner density to be used for printing, see Adjusting Print Density(P. 577) .
● If you want to correct color mismatch or hue difference, see
Correcting Color Mismatch and Hues(P. 579) .
● If you want to adjust the print position, see Adjusting Print Position(P. 582) .
◼ Printing Reports and Lists
● Printing out lists of settings or the like, see Printing Reports and Lists(P. 586) .
Maintenance
561