<Mode 3>
If you want to avoid a slower printing speed, select this mode. However, improvement of the print quality will
be impossible.
Special Print Adj. C
Streaks may appear on printed images depending on the paper type or the environmental conditions. Setting this item
to <On> may solve the problem.
Off
On
( ) <User Maintenance> <Special Print Adj. C> <Off> or <On>
● If you set this item to <On>, the printing speed will be slower.
Adjust Barcode
Set this item to <Narrow> when a printed barcode cannot be read correctly.
Normal
Narrow
(
)
<User Maintenance>
<Adjust Barcode>
<Normal> or
<Narrow>
Update Firmware
Upgrades the rmware of the machine.
( ) <User Maintenance> <Update Firmware> Select the connection
method <Yes>
Setting Menu List
430
To Next Page
Loading...
