Canon LBP710Cx - Page 320

[Use IEEE 802.1X]
Select the check box to enable IEEE 802.1X authentication.
[Login Name]
Enter up to 24 alphanumeric characters for a name (EAP identity) that is used for identifying the user.
Setting TLS
1
Select the [Use TLS] check box and click [Key and Certicate].
● You cannot use TLS with TTLS or PEAP.
2
Select a key from the list of keys and certicates, and click [Default Key Settings].
Viewing details of a key pair or certicate
● You can check the details of the certicate or verify the certicate by clicking the corresponding text
link under [Key Name], or the certicate icon.
Verifying Key Pairs and Digital Certicates(P. 332)
Setting TTLS/PEAP
1
Select the [Use TTLS] or [Use PEAP] check box.
Security
314