Canon LBP710Cx - Page 498

(Display only)
Conguration Page
You can check the machine settings (
Setup Menu(P. 363) ) congured in the machine. You can also check other
information including the amount of remaining toner, the number of printed pages, and the capacity of the memory
(RAM) mounted on the machine. Conguration Page(P. 586)
Network Status Print
Select to print a list of the settings ( Network(P. 378) ) about the network congured in the machine. You can also
check the information about the security including the address lter settings and IPSec settings. Network Status
Print(P. 586)
Consmbl. Status Prt.
The information such as toner remaining amount, warning messages, and information on where you can purchase
new toner cartridges is printed out.
Consmbl. Status Prt.(P. 587)
IPSec Policy List
Select to print a list of the IPSec policy names and settings (
Conguring IPSec Settings(P. 301) ) congured in the
machine. IPSec Policy List(P. 587)
Calibration
When color mismatch occurs or when the colors have changed and the data is not printed in the correct colors
(specied colors), you can perform calibration. Correcting Color Mismatch and Hues(P. 579)
Color Mismatch Corr.
Print color mismatch refers to a shift in the positions of colors that may occur when printing one image with
multiple toner cartridges. When color mismatch occurs, correction can be made by adjusting the print start
positions of the respective colors
Density Control
When the colors have changed and the data is not printed in the correct colors (specied colors), correction can
be made by density control for the respective colors.
Full Calibration
Performs both <Color Mismatch Corr.> and <Density Control> simultaneously.
PCL Utility
Select to print a list of the internal information items registered in the machine for use of the PCL mode.
Font List
Select to print a list of the fonts that can be used in the PCL mode. PCL Font List(P. 590)
Setting Menu List
492