When loading paper in the multi-purpose tray
Load the paper with the front logo side (the side to print the rst page of the document) face up.
The <Paper Feed Method> setting
● When you print on preprinted paper, you need to change the facing of the paper to load each time you
switch between 1-sided and 2-sided printing. However, if <Paper Feed Method> is set to <Print Side Priority>,
the facing that you use for loading preprinted paper for 2-sided printing (logo side face down for paper
drawer or up for multi-purpose tray) can also be used for 1-sided printing. This setting is especially useful if
you frequently perform both 1-sided and 2-sided printing. Paper Feed Method(P. 432)
Basic Operations
56
To Next Page
Loading...
