Canon LBP710Cx - Page 664

(Use Community Name 1)
SNMP_COMMUNITY1_
ACCESS
(MIB Access Permission)
RW (Read/Write), RO (Read Only)
RO
SNMP_COMMUNITY1_
NAME
(Community Name 1)
Up to 32 alphanumeric
characters
public
SNMP_COMMUNITY2_
ENB
(Use Community Name 2)
ON, OFF
OFF
SNMP_COMMUNITY2_
ACCESS
(MIB Access Permission)
RW (Read/Write), RO (Read Only)
RO
SNMP_COMMUNITY2_
NAME
(Community Name 2)
Up to 32 alphanumeric
characters
public2
SNMP_V3_ENB
(Use SNMPv3)
ON, OFF
OFF
SNMP_GET_PRT_MNG_
INFO
(Obtain Printer Management Information from Host)
ON, OFF
OFF
SPOOLER Menu (Spool Settings)
Item Name
Setting Value Factory Default Setting
SPOOL_ENB
(Use Spooler)
ON, OFF
OFF
START TIMER Menu (Waiting Time Settings for Connection at Startup)
Item Name
Setting Value Factory Default Setting
STRT_DELAY_TIME
(Waiting Time for Connection at Startup)
0 to 300 (sec.)
0
RUI Menu (Remote UI Settings)
Item Name
Setting Value Factory Default Setting
RUI_ENB
(Use Remote UI)
ON, OFF
ON
8
Enter "put <le name> CONFIG" and press the [ENTER] key.
● Specify the edited le name in <le name> (example: put Setting.txt CONFIG).
➠ The setting le is uploaded.
Appendix
658