The specified application does not support this device.
Cannot install this application because an applet included in the specified application has exceeded
the area that can be displayed in the device panel.
The specified file is an update file. Stop the application that you want update and then install the
file.
Cannot install the application because the license requirement is different. Uninstall the specified
application, and then try to install the application again.
Cannot install this application because storage space has been exceeded. Uninstall other
applications and then try to install it again.
Could not cancel installation. Installation has been successfully completed.
This application does not support the MEAP version of the device. Contact your service
representative after checking the application version.
Problem
License files contain the serial number information of printers in which the license file can
be installed. The specified license cannot be installed because it does not contain the
printer's serial number information.
Action Specify a license file that matches the printer's serial number.
Problem
Some applications can only be installed in certain printer models. It cannot be installed in
this model.
Action Specify an application that supports this printer.
Problem
The application cannot be installed because the display area of an applet included in the
application exceeds the area that can be displayed on the operation panel of the printer.
Action Install an application that contains applets that support this printer.
Problem
The specified application file is a file for updating an application which is already installed.
It is necessary to stop the application which is to be updated before updating.
Action Stop the application that you want to update, and then perform the update again.
Problem
You have tried to upgrade an application which is already installed using a version of the
same application with different license requirements.
Action Upgrade using the same license conditions.
Problem The application cannot be installed because there is not enough free storage capacity.
Action Make storage capacity available by uninstalling an application that is not being used.
Problem The [Cancel] button was pressed when the installation operation could not be cancelled.
Action
Disable the license file, download it from the [License Management] page, and then
uninstall it.
Problem
The specified application cannot be installed because it does not support the MEAP
version on this printer.
9
To Next Page
Loading...
