Canon LBP710Cx - Page 871

Settings are incorrect.
Check to see if the password is incorrect.
Enter Dept. ID within 7 digits.
Check to see if the Department. ID is registered with the device.
The [Department ID] is incorrect.
Enter an integer for the [Department ID].
The [Department ID] is not entered.
Could not set authentication information because an error occurred.
Could not delete authentication information because an error occurred.
<Settings are incorrect.>
<The [Department ID] is incorrect. Enter an
integer for the [Department ID].>
<The [Department ID] is not entered.>
<Could not set authentication information
because an error occurred.>
<Could not delete authentication information
because an error occurred.>
Problem
Cannot set authentication information because either the Dept. ID entered does not exist,
or the PIN was entered incorrectly.
Action Enter a Dept. ID and PIN that are registered in the printer.
Problem
The Dept. ID that was entered is a positive integer, but the registered Dept. ID is not a
positive integer.
Action Enter the correct Dept. ID that is registered in the device.
Problem The Dept. ID is blank.
Action Specify a Dept. ID.
Problem An error has occurred for some reason, so authentication information could not be set.
Action Contact your local authorized Canon dealer or sales representatives.
Problem
An error has occurred for some reason, so authentication information could not be
deleted.
Action Contact your local authorized Canon dealer or sales representatives.
Errors Relating to the [Authentication Information Settings] Page
11