Canon PRISMAsync v3.2 User Manual

NOTE
If the error is caused by a job on the system that cannot be printed, press the [Delete All Jobs]
button on the screen to remove the print jobs.
The [Delete all Jobs] button is only visible the second time a 11504 error occurs.
After all print jobs are deleted, the system will reboot and start up normally.
11504 Error Screen behaviour
124 Chapter 10 - Troubleshooting
PRISMAsync V3.2

Canon PRISMAsync v3.2 Specifications

General

Brand	Canon
Model	PRISMAsync v3.2
Category	Controller
Language	English