How to print transparencies with best quality
Description
Transparencies might cause image quality problems like darker areas etc. The copier and the
PRISMAsync will make a difference between Text/Vector and Images. Different screens can be
specified for these objects.
Solution
Some tips for improving Image Quality in these situations are:
1. Use the APPE engine for printing. This means
- Use Hotfolder, Automated Workflow or PRISMAprepare.
- Do not use the driver, since this creates Postscript.
2. Make sure a good calibrations was performed for both screenings (Normal and Fine) for all
media families
3. Make the screening for text and images the same for 600 dpi printing (No screen jump will
occur)
4. Make a new preset if you do not want to do this for all jobs
How to print transparencies with best quality
134 Chapter 11 - Appendix
PRISMAsync V3.2
To Next Page
Loading...
