Canon PRISMAsync v3.2 - Unpack PRISMAsync

Unpack the PRISMAsync
Introduction
The PRISMAsync
is assembled and shipped from the factory with pre-installed software.
Unpack procedure
Step Action
1 Open the box and carefully lift the PRISMAsync out of the box.
Store the original box and packing material in case the
PRISMAsync needs to be
transported at a later date.
2 Check the contents of the box
3 Provide the customer with the Safety Notice and User Documentation and Printer
Driver Notice.
The user documentation can also be downloaded from http://downloads.oce.com/ .
NOTE
Also see the engine service manual.
Unpack the PRISMAsync
Chapter 3 - Installation 17
PRISMAsync V3.2