Canon PRISMAsync v3.2 User Manual

Media management
The
PRISMAsync uses a [Media] catalogue in which all the possible media that are used, are
defined. Definition of these new paper types is done in the Settings Editor. On the Operator Panel
you can gain access to the catalogue via the [System] -> [Media] tab.
[8] Media management
Procedure
1.
Skew and right-angle correction
Select a specific media that you want to adjust. Select the Skew Correction adjustment. A wizard
will start, guiding you through the adjustment.
[9] Skew correction
2.
[Curl correction]
Select a specific media that you want to adjust. Select the Curl correction adjustment. A screen
will pop up in which you can enter the values.
Descriptive images tell you if these values need to be positive or negative.
Media management
Chapter 4 - Using the PRISMAsync 45
PRISMAsync V3.2

Canon PRISMAsync v3.2 Specifications

General

Brand	Canon
Model	PRISMAsync v3.2
Category	Controller
Language	English