[14] Error 11506 in Normal mode
2. Press [Go to the service mode]
3.
The next screen will appear.
[15] 11506 in Service screen and engine off
4. Press the [Sleep] button to reset the error.
5.
From this point on you have the same situation as previously described (Restart copier in
Service Mode).
NOTE
In some cases the system needs to reboot the engine (max. 2x) to reach the correct start-up
situation.
Restart the copier only
54 Chapter 5 - Start, shutdown and restart the system
PRISMAsync V3.2
To Next Page
Loading...
