Canon PRISMAsync v3.2 User Manual

Step Action
9
Fasten the AUX control board.
•
Fix the board with a single screw on the PCI bracket side with a Philips screwdriver
10
Connect the internal connectors to the board.
• See
Access internal components on page 67
11
Re-install middle bracket and side cover.
•
Make sure the fixing on the middle bracket is in position. It should fit exactly on the
AUX control board.
Replace the AUX control board
72 Chapter 7 - Service procedures
PRISMAsync V3.2

Canon PRISMAsync v3.2 Specifications

General

Brand	Canon
Model	PRISMAsync v3.2
Category	Controller
Language	English