Admin Viewer/VB Viewer
157
The [Audio Transmission] button icon will change to while transmitting audio.
• To transmit audio, you must set [Server] > [Audio Server] > [Audio Reception from Viewer] to [Enable] in the Setting Page
beforehand (P. 92).
• Audio transmission will continue even if you close the Audio Transmission panel.
• To use the audio function in environments that use a proxy server, select in Internet Explorer [Use a proxy server for your LAN] in
[Internet options] > [Connections] tab > [LAN settings] > [Proxy server], then specify the camera IP address in [Advanced] >
[Exceptions].
• Only [Administrator] can transmit audio from the Viewer.
3
Select the amount of time to transmit audio with [Audio sending time limit].
To Next Page
Loading...
