264
S030 Heater unit detected [info]
S070 Change to SSL certificate [info]
HTTP server notification
H143 User name specification error [notice]
H144 Password specification error [notice]
wvhttp notification
W001 Starting and stopping of system [info]
W030 Startup and shutdown of WebView
Livescope Client [info]
W031 Transmitted video data size [info]
W040 Clearing to external memory [info]
Audio server notification
B001 Starting and stopping of audio server
[info]
B011 Audio client connected [info]
Description The heater unit is detected. (S030)
Meaning A heater unit is attached.
Description ssl: succeeded to %1 certificate
(S070)
%1 generate | load | delete | restore
Meaning A certificate was generated/loaded/
deleted/restored
Countermeasure None
Description (http_auth.c.XXX) get_password failed,
IP:%1 (H143)
%1 IP address
Meaning An unknown user was specified in user
authentication.
Description (http_auth.c.XXX) password doesn’t
match for %1 username%2, IP:%3
(H144)
%1 URL XSS vulnerability countermeasure
implementation (process equivalent to
ftpd)
%2 User Name
%3 IP address
Meaning A wrong password was specified in
user authentication.
Description %1 webview (W001)
%1 Starting or stopping
Meaning wvhttp server (webview) has started or
stopped.
Description %1%2 host=<Host>, user=<User>,
prio=<Priority>(W030)
%1 W: WebView session, V: Session-less
video client, N: Session-less event
client
%2 +: Connect, -: Disconnect
Meaning The camera server client was
connected or disconnected.
Description %1= host=<Host>, user=<User>,
video=<jpg | h264>:<Number of
frames> (W031)
1% W: WebView session, V: Session-less
video client
Meaning When a client disconnected, the total
data that was sent to the client
displayed in number of frames.
Description %1 the image storing - %2 (W040)
%1 Starting or stopping
%2 Reason for starting/stopping
Meaning Started or stopped clearing stream
recording to external memory.
Description %1 audio. (B001)
%1 starting | stopping
Meaning The audio server was started/shut
down.
Description [%1] %2 connected n=%3 (B011)
%1 Client type (send | recv)
%2 Client host IP address
%3 Total number of clients
Meaning An audio client was connected.
To Next Page
Loading...
