2. Precautionary Measures
For Microsoft Windows®95 ver. 4.00.950B only.
1. Close all of active software applications.
2. Select [Start], designate the file name, and click on [Run...].
3. Enter “regedit” in the “Open:” field via the keyboard.
4. Click [OK], and the Registry Editor will start up.
5. Double-click “HKEY_LOCAL_MACHINE”
6. Double-click [System]/
7. Double-click [CurrentControlSet].
8. Double-click [Service].
9. Double-click [Vxd].
10. Double-click [VCOMM].
11. Double-click “EnablePowerManagement” located on the right window.
12. Edit “0000 01 00 00 00” to “0000 00 00 00 00.”
13. Click [OK].
14. Click [Registry], then choose [Exit Registry Editor].
15. Select [Start] > [Shut Down...] > “Restart the computer?” then click [Yes].
The precautionary measures are complete. Perform setup according to the instruction
manual for the balance.
This precautionary measure is effective automatically, whenever the Windows® 95
system is restarted. You will be required to perform the precautionary measure again
if your Windows® 95 system is re-installed.
3. Reference
Microsoft Corporation provides information on this problem at the following site:
http://premium.microsoft.com/support/kb/articles/q170/8/45.asp/
Microsoft and Windows® are registered trademarks of Microsoft Corporation.
To Next Page
Loading...
Need help?
General
