42
7.5 Related Useful Functions
7.5.1 Last Menu Recall
This function is convenient when an application requires frequent changes to a specific menu item.
During mass display or menu selection, press and hold the [CAL] key for approximately three
seconds. The last menu item that was changed or set is displayed.
7.5.2 Returning to the Default Settings (menu reset)
The procedure below describes how to reset the menu and return to the default settings.
Default settings are indicated with the 72 symbol in the Menu Map.
Select menu item to reset the menu.
1. In the gram-display, press the [CAL] key
repeatedly until the “S” of “SEL:EAUS” blinks.
2. Press the [O/T] key. The Menu Group 6 is
selected.
3. Press the [CAL] key repeatedly until the “r” in
“S-dtSCr,” is blinking.
4. Press the [O/T] key to display “rESEt?” (“?”
o indicate menu reset completion.
6. Press the [POWER] key several times (or hold
it for approximately 3 seconds) to return to th
-display.
x The settings made in “15.4 Decimal Point Symbol in Output Data” and“8.2 Date
Output Style” are not be cleared with Menu reset.
x Environmental setting of Pouring mode (11.2) is not cleared with Menu reset.
x Operational condition setting of Animal Weighing mode (14.6) returns to
the default (Cond 1).
To Next Page
Loading...
Need help?
General
