40
Important Note on Menu Item Selection
Even the desired menu item is reached and displayed, it is not yet set unless
Stability mark ( t ) is illuminated with it. Do not fail to press [O/T] key to put
Stability mark before returning to the mass display.
6. Press the [O/T] key to select this item. “SEt” is
displayed and the stability mark now appears with
“Eb-4”.
7. Return to the desired menu by pressing the
[POWER] key. If pressed and held, it returns to
the gram-display.
Once the menu items have been set based on the installation environment and weighing
purpose, it is not necessary to select the menu items each time the balance is used. Once
the contents of the menu are set, they are stored even if the balance is turned OFF or if the
power is disconnected.
Major Menu Description
Menu Group
Symbol that blinks
at beginning of menu
Menu Items Included
1
Calibration
2 (Graphic display) Analog display, checkweighing, and target weighing
3 E Installation environment and taring
4 A Application measurements and automatic output
5 U Unit conversion and specific gravity measurement
6 S Clock set-up and calibration record
7
Communication with computer and external devices.
To Next Page
Loading...
Need help?
General
