Case 570T - Backhoe attachment controls

3-CONTROLSANDINSTRUMENTS
BACKHOEATTACHMENTCONTROLS
Booms,dippers,andbuckets-Controlidentication
NOTICE:Beforeusingthebackhoeattachment,makesurethestabilizersarecompletelylowered.
Backhoeboomandbackhoeattachmentleft-handcontrollever
Theleverhasvepositions:
Position“0”:Neutral/hold.Thispositionenablestheattachmentmovementtobestopped.Assoonastheleveris
released,itautomaticallyreturnstotheneutralposition“0”andtheattachmentremainsinthepositionwhereitwas
whenmovementstopped.
Position“A”:SwingLEFT-RIGHT.
Position“B”:SwingRIGHT-LEFT.
Position“C”:DipperEXTEND.
Position“D”:DipperRETRACT .
Backhoedipperandbackhoeattachmentright-handcontrollever
Theleverhasvepositions:
Position“0”:Neutral/hold.Thispositionenablestheattachmentmovementtobestopped.Assoonastheleveris
released,itautomaticallyreturnstotheneutralposition“0”andtheattachmentremainsinthepositionwhereitwas
whenmovementstopped.
Position“E”:BucketCURLIN.
Position“F”:BucketDUMP .
Position“G”:BoomDOWN.
Position“H”:BoomUP .
Sliderframecontrol
Pressandholdthepedal(1)tounlockthesliderframeandusingacombinationofboththecontrollevers,movethe
slideronthe”H”frame.
3-27