CG Drives & Automation 01-5980-01r2 167
Appendix 1: Menu List
This is a list of the Emotron TSA menu parameters and their factory settings, along with communication settings for the most important bus formats.
Complete lists with communication data and parameter set information could be downloaded from www. cgglobal.com or www.emotron.com.
Menu Parameters Default settings
Customer settings
Modbus Inst.
DeviceNet no.
Fieldbus
format
Modbus
format
Notes
A B C D
100 StartWindow 9999 page 69
110 1st Line El Power 43001 UInt UInt
120 2nd Line Current 43002 UInt UInt
200 Main Setup page 69
210 Operation page 69
211 Language English 43011 UInt UInt
212 Select Motor M1 43012 UInt UInt
215 Action Ctrl
2151 Run/Stp Ctr Remote 43015 UInt UInt
2152 JogCtrl Remote 43008 UInt UInt
216 Reset Ctrl Remote+Keyb 43016 UInt UInt
217 Key Func
2171 FunctionKey Toggle 43735 UInt UInt
2173 LocRunCtrl Keyboard 43010 UInt UInt
2174 FWD key FWD 43736 UInt UInt
2175 REV key Off 43737 UInt UInt
218 Lock Code? 0 43018 UInt, 1=1 UInt
219 Rotation FWD 43019 UInt UInt
21A Level/Edge Edge 43020 UInt UInt
21C Units SI 43750 UInt UInt
220 Motor Data page 73
221 Motor Volts [Motor] V 43041 Long, 1=0.1V EInt
222 Motor Freq 50Hz 43042 Long, 1=1Hz EInt
To Next Page
Loading...
Need help?
General
