CHC i83 User Manual 16
displays
SET: ON
Format: HCN
Sample: 1Hz
Duration: 1440min
OK
Cancel
SET
: recording ON or OFF
Format
: choose between
HCN
HCN and Rinex2.11
HCN and Rinex 3.02
Rinex2.11
Rinex3.02
Sample
: choose between
5 Hz
1 Hz
2 seconds
5 seconds
10 seconds
15 seconds
30 seconds
60 seconds
Duration
: enter file length in minutes.
OK
: select and click to save changes.
Cancel
: select and click to abandon changes.
Click to move
down through the
items.
Click to change
items.
Finally click on OK or
Cancel, then to
return to the previous
menu.
displays
Mode: Auto Rover
Protocol: SATEL 3A
Step: 12.5KHz
Band:9600
Channel:1
Freq: 461.0250
Power: 0.5W
Format: CHC516
Fec: Close
OK
Cancel
Mode
: select between Auto Rover and Auto
Base.
Protocol
: SATEL 3AS, CHC, Transparent, TT450S.
Satel 3AS is the preferred radio protocol in the
USA.
Step
: 12.5KHz or 25KHz channel bandwidth.
Most FCC licenses require 12.5 KHz operation.
Band
: the over-the-air Baud rate of the radio
transmission. The Baud rate is forced by the
channel bandwidth.
Channel
: radio channel
Freq
: the radio frequency of the selected
channel
Power
: 0.5W, 1W, 2W output power. (Only
asked for Base operation.)
Format
: CHC516, RTD, CMR, RTCM2.3, RTCM3.0,
RTCM3.2. (Only asked for Base operation.)
CHC516 is preferred and should be compatible
with any modern receiver that accepts RTCM3.2
correction formats. (Only asked for Base
operation.)
OK
: select and click to save changes.
Click to move
down through the
items.
Click to change
items.
Finally click on OK or
Cancel, then to
return to the previous
menu
To Next Page
Loading...
