CHC i83 User Manual 20
Click the
Login
button:
From the Wi-Fi interface, you can configure nearly every aspect of the receiver’s operation using the left-hand section
tabs and sub-items.
Configuring the Internal Cellular Modem
Internal GSM Method:
To use the internal Cellular modem, you will need an activated 4G NANO GSM SIM card. We recommend using
simbase.com:
Triple carrier coverage is available for $0.02 per day, plus $10 per gig (Q1 2024.) A network rover operating 20 days per
month for 8-hours per day will use about $4.50 per month in data. With Simbase you don’t pay for data that you don’t
use, and you don’t lose excess data that you are forced to purchase monthly. iGage has no affiliation with Simbase and
we do not receive any compensation when you use Simbase services.
Insert the NANO SIM card into the card slot:
Receivers use a NANO sized SIM card. (NANO is the smallest sized SIM card.) Insert cards with the gold contacts facing
away from the 5/8” threaded insert at the center of the receiver. The notch end goes in first. The SIM card gold contacts
should point towards the gold bar at the bottom of the slot. The icon shown on the rubber slot cover is misleading.
To eject a SIM card, push it in to trigger the spring-loaded ejection mechanism.
You must configure the APN (Access Point Name) via the web interface or with field software. In the United States of
America, the modem power must be cycled to reset the cellular network. In other words, if the receiver is turned on and
you insert or change the SIM card, you must cycle the receiver’s power.
Configuring the APN and Dialing parameters with LandStar8
Connect to the receiver.
From the main menu
Config
(tab), click the
Advanced
button:
To Next Page
Loading...
