CHCNAV CHC i83 - Verifying the NTRIP Caster; HCN Vs. RINEX2 Vs. RINEX3 Observation Files

27 CHC i83 User Manual
Verifying the NTRIP Caster
While a PC is connected to the receiver, it is possible to use an NTRIP client to verify that the caster is functional. This is
the configuration for the receiver setup above:
Click OK.
Change the
NTRIP Stream
to
Download Source Table
Then click
Connect
.
Drop the NTRIP Stream:
and select
RTCM32
.
Click
Connect
:
Correction data will begin streaming.
HCN vs. RINEX2 vs. RINEX3 Observation files
The i83 receiver can directly record 3 types of observation files:
RINEX2 Legacy: no longer suitable for GNSS receivers.
RINEX3: correct choice if you don’t want to use the iGx_Download helper tool.
HCN: correct choice if you want to use iGx_Download.