5-6 Installing the 6200 network element
6200 Packet-Optical Platform Installation, Commissioning, and Testing Procedures
Release 1.1 009-6200-201 Draft Issue 1
Copyright
©
2014 Ciena
®
Corporation September 2014
Procedure 5-1 (continued)
Installing the 6200 shelf
Step Action
5 Move the 6200 network element to the desired rack position, locate the top
and bottom fixing holes on each side of the rack and fit the captive nuts to the
rack.
6 Fasten the 6200 network element and the cable routing brackets to the rack
with the M6 screws. See Figure 5-1.
7 You have successfully completed installing the 6200 shelf.
—end—
Figure 5-1
19 in. Rack installation of 6200
To Next Page
Loading...