MDT500 HE - Operator's Manual
MF Group S.p.A. - CIM division accepts no responsibility for the
damages that might be caused by non-respect of the above stated
instructions. In case of faulty operation please contact the technical
service.
The machine is provided with labels signaling possible danger areas.
Their meaning is described in the following paragraph.
MF Group CIM division cannot be held responsible for the
consequences of not abiding by these rules for the use of the
machine. In case of breakdown call the technical service.
1.10 OPERATION IN TECHNICIAN MODE
The authorized technical staff can temporarily disable the safety
system associated to the "cover open" thus allowing the use of the
machine when protections are not active (menu SERVICE -
DISABLE COVER, protected by a password).
CAUTION! DO NOT USE THE MACHINE IN TECHNICIAN MODE
UNLESS SPECIFICALLY AUTHORIZED BY MF Group – CIM
division. MODE RESERVED TO EXPERIENCED AND
AUTHORIZED USERS.
Take the necessary precautions to make sure that the password that
allows to disable the safety devices is not given to non-qualified
staff.
If you think that non-authorized people might know the password,
modify it immediately (refer to the technical manual or contact the
technical staff of MF Group - CIM division).
MF Group – CIM division accepts no responsibility for any damages
to people, property or animals due to the non-respect of the above-
stated precautions and particularly to the use of the machine with
protections disabled by non-authorized staff.
NEVER REMOVE OR MODIFY THE
PROTECTIONS
To Next Page