CIM PRO COMBI 1000 - A.10 USER’S PASSWORD; A.11 EMBOSSING WHEEL

A - 18
OPERATOR’SMANUAL PRO SERIES
A MACHINE SET UP




A.10 USER’S PASSWORD
The password restricts the use of the machine to the
operators who know it.
PASSWORD


• Press

ENTER

• Press
PASSWORD ENABLED
(ON/OFF) (OFF)

Select ON to enable the passwortd function.


• Press

ENTER

• Press
USER PASSWORD
(????)
NEW VALUE:
Digit the password (max. 4 characters) The menu is
active only if the password function has been enabled.


• Press

ENTER

• Press
SERIAL NUMBER (......)
NEW VALUE:

If the field is empty, digit the serial number of the
machine.
• Press
ABORT
DUP
twice to exit Setup

A.11 EMBOSSING WHEEL
CHOICE OF THE TYPE OF DRUM (DRUM1)
(DRUM1, DRUM2, DRUM3, SPECIAL)
Drum 1: standard drum 60 characters
Drum 2: standard drum 60 characters USA
Drum 3: standard drum 105 characters
Special: custom configuration