1 GENERAL DESCRIPTION
1-11
OPERATOR’S MANUAL PRO SERIES
1.15 POSITIONING THE MACHINE
The machine should work in a closed room protected
from dust and excessive humidity. The machine should
be positioned in such a way that its distance from the
walls, doors, windows, other machines or working
positions guarantees immediate access in the case of
urgency, maintenance or reparation.
DO NOT INSTALL THIS MACHINE IN THE
NEIGHBOURHOOD OF OTHER
OPERATING MACHINES WHICH
PRODUCE DUST SINCE DUST CAN
DEPOSIT ITSELF INSIDE THE MACHINE
AND CAUSE DAMAGE TO THE INTERNAL
ELECTRIC DEVICES.
LIQUID SHOULD NOT BE PLACED ON THE
MACHINE COVER SINCE IT HAS NOT BEEN WATER
SEALED.IT IS PARTICULARY IMPORTANT TO
AVOID OXIDATION WHICH WOULD ADDTO THE
WEAR AND EROSION OF THE MECHANICAL
PARTS.
The machine has been made with fire proof materials
thus diminishing the risk of general fire. Short circuit
protection has been implemented so that the power
supply is immediately isolated thus avoiding unwanted
current absorption from the external power line.
THE MACHINE GENERATES A
WORKING NOISE LEVEL LOWER THAN
75DB (MEASURED AT A DISTANCE OF
ONE METER AND AT THE HEIGHT OF
1.60 M FROM THE GROUND).
THE MACHINE PLACED ON A SUPPORT TABLE
WHICH AMPLIFIES AIRBORNE NOISE OR WITH
CARELESS MECHANICAL SETTING, THIS VALUE
MAY BE EXCEEDED. IF THE DAILY PERSONAL
EXPOSURE OF THE OPERATOR TO NOISE IS
LIKELY TO EXCEED 85DB THE OPERATOR MUST
WEAR SOME FORM OF EFFICIENT EAR
PROTECTION, IN ACCORDANCE WITH THE 86/188/
CEE STANDARDS.
ATTENTION! THIS IS A “CLASS A” PRODUCT. IN A
DOMESTIC ENVIRONMENT THIS PRODUCT MAY
CAUSE RADIO INTERFERENCE IN WHICH CASE
THE USER MAY BE REQUIRED TO TAKE
ADEQUATE MEASURES.
To Next Page
Loading...
