CIM PRO COMBI 1000 - 3.1 ACCESSORIES SUPPLIED

3 INSTALLATION
3-3
OPERATOR’S MANUAL PRO SERIES









A B C


D E F G
3.1 ACCESSORIES SUPPLIED
Before installing the machine the operator is advised to
check that all the accessories are present and that none
have been damaged during transportation.
If any single element has been damaged the general
working of the machine can be compromised.
The following accessories are supplied with the printer:
A) n. 1 HARDWARE KEY FOR SOFTWARE
PRTECTION
B) SOFTWARE ON CD-ROM
C) THERMOGRAPHIC RIBBON KIT
D) n. 1 SERIAL CABLE
E) n. 1 PAIR OF KEYS TO OPEN THE UPPER COVER
F) MOUSE PAD
G) BAG
H I L M N
H) n. 1 PARALLEL CABLE
I) ENVELOPE CONTAINING n. 1 PAIR OF KEYS FOR
SERVICE USE
L) TRIAL CARDS
M) MANUAL ON CD-ROM
N) n. 1 SUPPLY CABLE


WARNING! THE MACHINE WEIGHS 45
KG. ALL DISPLACEMENTS MUST BE
DONE WITH 2 PERSONS.


WARNING! USE ONLY LISTED
DETACHABLE POWER SUPPLY CORD
NOT EXCEEDING 4,6 M. LENGHT,
TYPE SVT OR SJT, 3X18 AWG, WITH A
MOLDED-ON CONNECTION BODY
AND A LISTED PLUG CAP RATED 10 A,
125 V.