A - 26
OPERATOR’SMANUAL PRO SERIES
A MACHINE SET UP
A.16 CARD TESTS
# Test Description
0 Embossing of the drum configuration
1 Embossing of four “L” on the corners of the card
2 Embossing of a VISA like text, ISO tracks 1,2,3 encoding + tipper
3 ISO track 2 encoding
4 ISO tracks 1,2,3 encoding
5 Embossing of the mechanical setup parameters
6 Embossing of a CIM text + tipper
7 Embossing of a CIM text using the infill
8 Embossing of a VISA like text + tipper
9 Chip-card + card eject
10 Embossing of upper case characters to check pressure
11 Embossing of OCR characters to check pressure
12 Card load + tipper
13 Feed card and eject card to positive unloader
14 Feed card and eject card to negative unloader
15 Thermal printing of the mechanical setup
16 Transact encoding
17 JIS A track encoding + embossing of VISA like text + tipper
21 Embossing of the characters “0” on the ridge of the cared
22 ISO tracks 1,2,3 encoding + Thermo Visa test
23 ISO tracks 1,2,3 encoding+ JIS A
26 CIM Thermo test
28 Visa like Thermo test on the front side
29 Visa like Thermo test on the rear side
31 Visa like Thermo test on the front & rear side
32 ISO tracks 1,2,3 encoding + VISA like text printing front and rear
33 Feed card and eject card to positive unloader + flip card
35 thermographic printing of a Barcode 2/5 Interleaved
36 Transact encoding and e thermographic text printing
40 CIM thermo Setup
41 monochr. #1 CIM thermo
42 monochr. #2 CIM thermo (barcode)
43 monochr. #3 CIM thermo (barcode, texts and box)
44 monochr. #4 CIM thermo (barcode and texts 0°, 90°, 180°, 270°)
45 colour #1 CIM thermo (gray tones)
46 colour #2 CIM thermo (horizontal bars)
47 colour #3 CIM thermo (vertical bars)
48 colour #4 CIM thermo (vertical and horizontal bars + gray tones)
49 Position under reader (No read) + card eject following the key “Start”
52 ISO 1,2,3 encoding + embossing of VISA like text + tipper + Chip
58 Embossing of VISA like text + tipper + chip
To Next Page
Loading...
