1-15
OPERATOR’S MANUAL PRO SERIES
1 GENERAL DESCRIPTION
1.18 SERVICE MODE FUNCTIONING
The machine can work with the safety guards
deactivated. This mode allows to operate the machine
with the safety covers open.
Contact CIM Technical Service to receive the service
keys and the abilitation to use the machine in the
service mode.
ATTENTION! DO NOT USE THE MACHINE IN
SERVICE MODE IF NOT EXPRESSIVELY
AUTHORIZED BY MF GROUP srl . THIS FUNCTIONING
MODE IS RESTRICTED TO AUTHORIZED AND EXPERT
USERS ONLY.
1.19 SAFETY GUARDS FUNCTIONAL
CHECK
To ensure safe machine operations, the safety guards
mounted on the machine covers must function correctly.
Before starting production (at least once a day), turn on
the machine; when it is in the READY mode, open the
upper cover. Check that the machine turns to the
PAUSE mode (alarm E-70 on the display). Close the
cover and and press START to go back to the READY
mode. Repeat the procedure by opening the lower front
cover. If the machine does not turn to the PAUSE mode,
the safety guards are damaged. In this case, turn off the
machine and contact the technical service.
To Next Page
Loading...