CIM PRO COMBI 1000 - 1.14 PRODUCTION CAPACITY

1 GENERAL DESCRIPTION
1 - 10
OPERATOR’SMANUAL PRO SERIES


1.14 PRODUCTION CAPACITY
ATTENTION! THE MACHINE IS NOT INTENDED FOR
CONTINUOUS USE (MAX. 8-9 HOURS/DAY).

Card dimensions Standard ISO CR80
Card thickness from 0,40 mm to 0,84 mm
(ISO 7810 = 0,76)
Thermographic printing
area
full card
(300 dpi)
Embossing area 9 rows X 31 characters
limit at 3 mm from lower
card ridge
Tipper area 40 X 76 mm
Tipper ribbon 61 m X 80 mm
(approx. 2000 cards)
Thermographic ribbon monochromatic 250 m
colour 300 m X 5 panels
Infiller ribbon 122 m X 8 mm
(approx. 830 cards)
Embossing unit capacity 105 characters on 1
embosser
Thermographic ribbon
capacity
monochromatic: 1000/
3000 prints
colour 5 panels: 300/500
colour 3 panels: 300/510
Loading hopper capacity 200 cards
Unloading tray capacity 200 cards
Negative unloading tray
capacity
10 cards
Cards produced: up to 750 monochr or 200 colour
cards/hour*
* Productivity depends on the number of characters
and the data to be printed