3-1
OPERATOR’S MANUAL PRO SERIES
1 GENERAL DESCRIPTION
1 2
1.1 GENERAL DESCRIPTION
C1000 PRO is an automatic personalization system for
plastic cards designed to emboss and colour the
characters, codify the barcode and print thermographic
images.
C1000 PRO, thanks to the MSP
TM
system (Multi Smart
Processing), is able to process 5 different cards
simultaneously.
The CIMTHERM module stores all the necessary
3
information on a Flash memory, it is to say a memory
which can be written without an external programming
device.
This allows to store the encoding (machine FW) and
resident data (logos, fonts) directly on the card via a
serial communication.
The C1000 PRO SERIES machine works connected to
a PC which sends the personalization data using the
serial CIM protocol CHIP 10.
The machine is equipped with an upper cover (2) with
locking key, a push-to-open discharge unit (1) and front
panel (3). To open the front panel (3) it is necessary to
open the upper cover (2) first, then press where
indicated by the label. To close it again, push until it
engages.
To Next Page
Loading...
