1-13
OPERATOR’S MANUAL PRO SERIES
1 GENERAL DESCRIPTION
ATTENTION! UNDER NO CIRCUMSTANCES
REMOVE OR MODIFY THE INTERNAL SAFETY
DEVICES.
To maximize the safety, covers and any metal
accessible part are electrically connected to ground.
The efficiency of the connection is tested on every
sample by the internal quality check before putting the
product on the market.
ATTENTION! THE MACHINE IS
FURNISHED WITH SAFETY GUARDS
WHICH PROTECT THE OPERATOR
FROM COMING INTO CONTACT WITH
THE DANGEROUS MECHANICAL AND
ELECTRICAL PARTS INSIDE THE MACHINE. ONLY
THOSE PERSONS WHO ARE SPECIALISED IN
REPAIRS AND MAINTENANCE AND WHO HAVE
BEEN AUTHORISED SHOULD HAVE ACCESS TO
THE ABOVE MENTIONED PARTS. SIMPLE
GENERAL MAINTENANCE CAN BE SAFELY
PERFORMED BY THE OPERATOR SO LONG AS
THE MACHINE HAS BEEN STOPPED AND THE
ELECTRICAL POWER SUPPLY HAS BEEN
DISCONNECTED.
Do not remove or modify in any circumstances the
enclosures and the internal protections. In case of
necessity refer to the CIM Technical Service.
MF GROUP srl. cannot be held responsible for the
consequences of not complying with these rules when
using the machine. In case of breakdown please call the
technical assistance.
To Next Page
Loading...
